Noise Level Measurement Procedure

Noise level measurement procedures are followed while monitoring sound level or acoustic energy level in the specified area. We will see what are important factors to keep in mind while measuring noise level.

These days annoying noise levels have started to become a major threat to public health. Noise in simple terms can be defined as unwanted or unpleasant sound which disturbs the environment and has a significant impact on the quality of life.

Yes! Exposure to continuous high noise levels can seriously jeopardize our quality of life.

We all very well know how exposure to high noise level can result in hearing impairment, headache, sleep disturbance and impaired task performance.

But, wait there is more.

Recent studies have shown, continuous exposure to high noise levels can result in

• Indigestion
• Peptic ulcer
• Hypertension
• Fatigue
• Hearing loss in new borns
• Prematurity, intrauterine growth retardation and disruption to normal growth and development of premature infant.

Now that we have got a slight idea of the effects long term exposure to noise can have on us, we can very well understand the importance to monitor noise pollution and try some control measures to minimize it.

The major step of noise level monitoring or rather any monitoring is measurement of pollutants.

For easy understanding of noise level measurement procedure we can follow the below mentioned simple steps.

Let’s first try to understand what are noise waves?

• Noise waves or acoustic waves are emitted from specific items or machinery
• Generally sound energy radiation pattern is isotropic i.e. it spreads in all direction.
• In most of the cases sound transmits through air in straight line
• Noise level are measured using noise level meter that provides various options for signal averaging and analysis points
• Main concern of noise level on human is it directly affects sleep, relaxation and conversion

Read More about Noise Mapping

Prerequisites for Noise Level Measurement Procedure

Measurement of Noise from One Source

The measurement of noise from a stationary source is carried out near the source where sound pressure is higher from the source compared to all other noise. The sound measured nearby the source tells the noise generated by the source.

Measurement of Noise for varying noise levels

If the amplitude of the noise level from source is varying with time, then suitable averaging technique or statistics which yield an appropriate measurement of noise is required. There are several alternatives can be selected to decide appropriate techniques.

If the sound level of the source is varying then the overall sound levels will be controlled by loud sound levels. Whenever there is a variation in noises then Leq method is used for measurement. Leq method is used to give higher weightage to louder noises by applying logarithmic averages.

To measure loud noises impulse noise level measurement Procedure is used. Noise level meters with sound pressure averaged for 35 ms are used for impulse noise level measurement. Non-impulsive measurement required noise level meters with the fast or slow averaging method. For fast averaging method time constant of 125 ms is set and for a slow averaging method, 1000 ms time is set in noise level meters.

Sound Pressure level or Sound Power level

Sound level measured from specific distance from sound source can be used to calculate sound power output. Similarly, Sound power of the source can be used to calculate pressure level for the sound at other locations away from the source. Sound pressure level or power levels are used in cases where measurement of sound level is difficult due to the presence of other loud noises.

Learn more about Noise Mapping Procedure

Noise Weakening with distance from noise source

The relation between sound power at source and sound power at particular distance from the source is influenced by multiple physical factors. The major factors in influencing the sound over the distance are source-receptor distance, topography of that area and ground level characteristics and meteorological conditions.

Noise Level measurement Procedure

Identification of location and its type and instrument

The first step before starting measurement of noise level is to always identify the type of location.

Location to be monitored could belong to any of the five areas, viz. Commercial, Industrial, Residential, silent and mixed.

This must be identified. Once we are able to identify the type, we can then select a position to place the instrument.

The instrument must always be positioned away from direct source, vibration and from any obstruction. This is because we are performing ambient noise monitoring.

Selection of Noise Measurement Instrument, Sampling Duration and Scale

To measure noise level, the most extensively used instrument is a Sound Level Meter (SLM) which commonly is known as a noise meter.

After selection of instrument, selection of sampling duration and scale is must. With these it is also necessary to consider the parameters which we need to measure like;

L_max, L_min, L_eq, etc

Comparison with Noise standards

Once we get the monitoring records then we can compare them with standards to understand if noise levels are exceeding the standards and if they are then by how much.

In India, we use standards prescribed by Central Pollution Control Board (CPCB).

Noise level Measurement Standards

The below table shows the Noise level Monitoring standards prescribed by Central Pollution Control Board (CPCB).

Area code	Category of area/Zone	Limits in db (A)
Day Time	Night Time
(A)	Industrial area	75	70
(B)	Commercial area	65	55
(C)	Residential area	55	45
(D)	Silence zone	50	40

Now, we would easily get an idea about noise level in the area we would monitor.

Once, we completely analyse these the next question comes is how to control and bring down the noise levels which are exceeding the permissible levels.

Read more about How to measure noise level measurement at office?

The answer to this question is below:

1. Control measures

Any Noise level monitoring or measurement procedure is complete only after the results are analysed and remedies are suggested to bring down the pollution if any.

To minimize the noise levels some simple steps which one can follow at individual levels are;

• Eliminate the source: Once the source is identified, we can try to eliminate the use of it completely.
• Substitution: If removal of pollutant source if not possible, then we can try for substitution of it with the less noise-producing source.
• Isolation: If the above two are not possible, one can try to either isolate the pollutant source or himself from it. For this one can make use of double panelled windows, acoustical tiles, etc.
• If any of the above methods are not effective in lowering noise levels, then one can opt for PPE (Personnel Protective Equipments) like ear muffs, cotton balls, etc.

How do you Measure Noise Level in the Workplace?

Measuring noise levels in the workplace involves using a sound level meter, a device designed to quantify the intensity of sound. The process typically begins by selecting a suitable sound level meter and calibrating it to ensure accuracy.

Measurement locations are then chosen, considering areas near machinery or workstations that are potential sources of noise. The sound level meter is positioned at these locations and measurements are taken, considering factors like height and distance from the noise source.

The duration and locations of measurements are monitored, and data is recorded and analyzed to assess compliance with noise exposure limits and identify areas that require noise control measures.

Adhering to local regulations and guidelines is essential in conducting accurate and meaningful noise level assessments in the workplace.

Also Read more about How to Reduce Noise level at Homes and office

Noise pollution can have a huge impact on our environment and quality of life. But to acquire a better and healthy life one simple thing we all can do is to remember to try to make less noise when we can, not only for our own sake but also for the sake of those who are around you!

Share this article with your Friends and family !

Source1

Source2