Ambient air quality monitoring stations measure real time and peak concentration levels of dangerous pollutants in air.
Industrial and vehicular emissions along with other anthropogenic activities release air pollutants in the atmosphere across Indian cities. It is important to monitor them and keep them under control in order to prevent risk to human health and protect the survival of other living organisms.
Centre of Pollution Control Board (CPCB) initiated a nationwide ambient air quality monitoring program called national air quality monitoring program (NAQMP) which comprises of 342 monitoring stations all over 127 Indian cities/towns located in 26 states and 4 union territories of the country. National Air Quality Monitoring Program (NAQMP) started in India in 1984-85 at Agra and Anpara with 7 Stations.
is performed for 24 hours which includes 4 hours of gaseous pollutants sampling and 8 hours of PM sampling, repeated twice a week to yield 104 observations in a year.
Read more for ambient air quality monitoring procedure
Ambient air quality monitoring stations help in examining the effectiveness of prescribed standards and assess the quality of life. Depending upon the conditions, measures can be implemented to maintain the ambient air quality standards.
The number of stations installed in a city is decided based upon the records of sources of air pollution and emission and the number may vary depending on factors such as the distribution of pollutants, data needed for monitoring, pollutants examined and the area population. In 1977, the World Health Organization (WHO) provided a set of guidelines on the location of monitoring stations.
The parameters influencing site selections for ambient air quality monitoring are sites which indicate possibility or traces of air pollution such as industrial areas, cities and traffic junctions.
Measurements from different cities allow a comparison and help to observe a trend in the patterns of air quality at various metropolitan locations. Factors such as long term site availability, easy access to the site during a year of conducting measurements, sufficient supply of water, electricity and telephone connection, and safe and protected site from adverse weather conditions determine the suitability of a site for the establishment of air quality monitoring stations. Since geographical parameters influence air quality measurements, they are measured during AAQM as well.
Learn More about New Emerging Trends in Air Quality Testing
Below are the parameters which can be recorded by AAQM station and respective sensor to measure air quality:
SO2 and nitrogen dioxide (NO2) are analyzed by wet chemical method which is easy to use in India. is used for measuring particulate matter and respirable particulate matter sample for RSPM in India.
The measurements of ozone, lead, CO are performed by laboratory methods. Field and laboratory measurements are conducted by experts (That’s us!) who ensure maintenance of quality control, and the data collected is handled and analyzed appropriated along with application of corrections wherever necessary.
The data obtained using AAQM stations is utilized by CPCB to examine the nationwide status of air pollutants.
Also read more about VOC Monitoring
It has been observed that SO2 and NO2 levels in residential areas of all the cities abide by the prescribed National Ambient Air Quality Standards (NAAQS). However, a decreasing trend has been found in the SO2 levels in some cities including Delhi and Lucknow. The RSPM levels have been discovered to exceed the prescribed NAAQS in residential areas of many cities displaying fluctuating trends in the values recorded.
There can be high levels of carbon monoxide (CO) in Delhi due to an increase in the number of vehicles per person, but despite an increase in the vehicular population, CO levels in Delhi have reduced during the past years. This can be attributed to the implementation of measures such as conversion of three wheelers of CNG in Delhi.
Karnataka State Pollution Control Board has installed and commissioned two Continuous Ambient Air Quality Monitoring Stations (CAAQMS), one at City Railway Station, Bangalore and another at Nisarga Bhavan, Saneguruvanahalli in Bangalore. Both the stations operate for 24 hours throughout the year and the data recovered is sent to the CPCB.
According to MPCB, manual monitors cost around Rs. 8 lakhs per year per station and continuous station costs around 1.5 crore per year per station. Some times individual researchers also can purchases Air quality monitoring stations from 25k to 3 lacs.
As per recent news MPCB and IIT-Kanpur has started the process to install 15 real time Air Quality Monitoring Stations, 10 in Mumbai and one each in Navi Mumbai, Thane, Kalyan, Vasai-Virar and Dombivali.
If you want to view current status of Air Quality Monitoring Stations on map and air quality in their location there are multiple websites which shows that:
Due to availability of air quality data, people can keep track on air quality and take measures in case air quality worsen.
Compact air quality monitoring station is the necessity of the time. So initially Air quality monitoring stations used to be very big but recently due to technological advancement their size has reduced significantly.
in Recent years Compact Air Quality Monitoring Stations can fit in small box and their function is to track and monitor more than 10-20 pollutants gases, Particulate and Environmental data. They can also send data real time to servers wirelessly along with their locations through GPS. Compact air quality monitoring stations have played very important role in making understand of importance of environment to Government, Transport Authorities, Industries, Air quality consultants, Researchers and Schools, etc.
Perfect Pollucon Services offer Services in Air Quality Monitoring/ Testing, Stack Emissions Monitoring, Indoor and Outdoor Air Quality Monitoring to various companies. Call us now for More information.
